CBLST - ZYVAX 600 - PART A

  • MSDS: CBLST
  • Manufacturer: ZYMET INC
  • Product Name: ZYVAX 600 - PART A
  • National Stock Number: 8010-00N070401
Product Identification

Product ID:ZYVAX 600 - PART A
MSDS Date:08/01/1995
FSC:8010
NIIN:00N070401
Kit Part:Y
MSDS Number: CBLST

Responsible Party
ZYMET INC
7 GREAT MEADOW LN
HANOVER, NJ 07936
US

Emergency Phone: 201-428-5245

Info Phone: 201-428-5245

Preparer: JAY PARTON

Cage: 010V7

Contractor
ZYMET INC
HANOVER, NJ 07936 US

Telephone: 201-428-5245

Cage: 010V7

Ingredients

PHENOL, 4,4'-ISOPROPYLIDENEDI-, POLYMER WITH

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN AND/OR EYE IRRITATION.
CHRONIC:SKIN SENSITIZATION - RASHES, HIVES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN ALLERGIES OR EYE
DISORDERS.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP IF NOT BREATHING.
GET MEDICAL ATTENTION. EYES:IMMED FLUSH W/WATER FOR @ LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN:REMOVE CONTAMD CLTHG. WIPE
EXCESS FROM SKIN & FLUSH W/WATER FOR 15 MINS, FOLLOWED BY WASHING
WITH SOAP & WATER. GET MED ATTN. INGEST:DO NOT INDUCE VOMIT. GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:480F,249C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA APPRVD RESP & PROT CLTHG AS
APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO. DIKE & CONTAIN.
REMOVE WITH VACUUM TRUCKS OR PUMP TO STOR/SALVAGE CNTNRS. SOAK UP
RESIDUE W/ABSORB SUCH AS CLAY/SAND. DISPOSE OF PROPERLY. FLUSH
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY PLACE WITH ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Other Precautions:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
CONTAMINATED LEATHER ARTICLES, INCLUDING SHOES, CANNOT BE
DECONTAMINATED AND SHOULD BE DESTROYED.

Exposure Controls

Respiratory Protection:NOT ORDINARILY REQUIRED. IF NECESSARY, USE A
NIOSH/MSHA APPROVED RESPIRATOR AS REQUIRED TO PREVENT OVEREXPOSURE.
Ventilation:LOCAL EXHAUST:WELL VENTILATED AREA. MECHANICAL
(GENERAL):EXHAUST HOOD. SPECIAL:EXPLOSION PROOF.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:RUBBER APRON. ANSI APPRVD EMERGENCY EYE WASH
& DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:1.20 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:CLEAR AMBER LIQUID, MILD AROMATIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:AMINE COMPOUNDS UNDER UNCONTROLLED
CONDITIONS.
Hazardous Decomposition Products:HEAT, CO, ALDEHYDES.
Conditions to Avoid Polymerization:AMINE COMPOUND UNDER UNCONTROLLED
CONDITIONS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.